1935/36 ford California rear license plate mount w/light mounts. I made this mount to accept the factory spare tire mount holes. This is a direct bolt on mount with hardware. (As seen in example pictures on 36 ford)
(2) interchangeable light mounts are included, one for the Hollywood #42 light and one for smaller empi 9547 light which is similar to the smaller Hollywood #52 light. The light wire goes through the original spare tire top mount hole(with your own loom or covering) So no drilling is needed into the body.
The license plate mount is setup to take 1935-51 California plates. Bungs are welded in place so you just screw your frame and plate in place with 1/4-20 bolts and lock washers provided. There are pre drilled holes in the light mounts to accept multiple frames, with extra material to drill for special license plate frames.
Get tired of running your plate this way down the road? No big deal, unbolt it and put your spare back on like nothing changed.
This license plate mount is a true Bolt-On part made exclusively for 1935 and 36 Fords, proudly handmade in the USA.
Included
•Plate mount
•Hollywood #42 light mount
•empi 9547/hollywood #52 light mount
•(4) stainless 1/4-20 button head bolts w/lock washers
•(3) 3/8-24 counter sunk bolts
•(3) rubber pads for welded mount spacers
•(2) 3/8 long 8-24 screws w/nuts and lock washers
•(2) 1” long 8-24 screws w/nuts and lock washers
Not Included
*Lights not included
*plate frame not included